Sublimation blanks, key chain or earrings sublimation blanks, DOUBLE-SIDED key chain or earring shape blanks for sublimation, oval

Product Type

This listing is for a Double-sided laser cut keychain sublimation blanks

Product Details

Dimensions:

• Height: Blanks measure 1.5"
• Thickness: 1/8 inch

Quantity Options:

• Comes in sets of 20 per shape

Hardware:

• Blanks WILL NOT come with hardware

Use:

• These can be used for earrings or keychains with the small jump ring chain

Material:

• Both sides of these keychain/earring blanks are white and can be sublimated
• Front & back sides are white; available in sublimation mdf or acrylic.

Intended Use

• Suitable for personal and commercial use
• You may not resell this file.
• Property of ACC Sublimation Blanks & Designs.

Processing Time

• Processing time is 5-7 business days.
  

Pressing Instructions (MDF)

1. Remove Protective Film
2. Press the image at 400 degrees Fahrenheit for 60-70 seconds with medium pressure.
3. Make sure to test your equipment for proper settings, as all heat presses can vary.

Pressing Instructions (ACRYLIC)

1. Remove Protective Film
2. Press the image at 400 degrees Fahrenheit for 60-70 seconds with medium pressure.
3. Make sure to test your equipment for proper settings, as all heat presses can vary.
4. Remove from the press, remove the tape and paper, and cool under a heavy object, as warping can occur.
5. If this happens, reheat the acrylic and place it under a heavy object to cool.
6. ONCE COOL, scrub off the remaining paper residue with a damp cloth or baby wipe.
7. DO NOT use alcohol on acrylic.
8. Assemble key ring hardware onto blank AFTER sublimating.

Additional Information

• Design templates will be available for download in our Facebook group after purchase.
• Join our Facebook group for specials and updates.

Disclaimer

• This listing is for blank sublimation-ready blanks.