Sippy cup Sublimation ready tumbler RTS, 2 in 1 sippy cup tumbler sublimation blank with 2 lids

Product

Sippy Tumbler for Sublimation

Description

• Sippy tumbler for sublimation. Glossy white.
• Includes 2 lids for increased versatility.
• Sippy cup lid with curved handles and slider lid.
• Both lids are screw-on style.
• Includes plastic straw.

Product Details

• Shiny white sublimation coating that produces vibrant colors.
• For use in a mug press or convection oven.
• Convection oven requires shrink wrap to apply pressure during baking, sold separately.
• Accessories such as rubber bottoms are also available in a separate listing.

Convection Oven Directions

• Apply sublimation transfer on the surface of the tumbler using heat tape. 
• For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler.
• Pulling the tape/transfer as tight as possible with no air pockets.
• If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides.
• Apply shrink wrap using a heat gun to shrink it tight to the tumbler.
• Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway.
• If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!
• Remove from oven and immediately remove shrink wrap and transfer.
• TUMBLER WILL BE HOT!!

Care Instruction

• No sealant is necessary on sublimation tumblers.
• Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed.

Additional Information

• For more information on sublimating these, please visit ACC Sublimation Blanks & Designs Facebook group for videos.