Skip to product information
1 of 1

ACC Sublimation Blanks & Designs

RTS Sublimation frosted glass jar blank with bamboo lid, candle jar blank, blank

Regular price $5.10 USD
Regular price Sale price $5.10 USD
Sale Sold out
Shipping calculated at checkout.

Frosted glass jar is sublimation ready. Comes with bamboo lid. 6oz capacity. Straight sides for easy sublimation.

For use in a mug/tumbler press or convection oven. Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately.

 

***Convection Oven Directions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations.

 Apply sublimation transfer on the surface of the jar using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam, Pulling the tape/transfer as tight as possible with no air pockets. If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no glass showing on the sides (Protects the jar from shrink wrap).

Apply shrink wrap using a heat gun to shrink it tight to the jar.

Bake in a convection oven at approximately 375 degrees F for 6-8 minutes, turning halfway.

Remove from oven and immediately remove shrink wrap and transfer. GLASS WILL BE HOT!! No sealant is necessary on sublimation. *Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.

 ***Tumbler Press Instructions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations.

Apply sublimation transfer on the surface of the jar using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam, Pulling the tape/transfer as tight as possible with no air pockets.

Press in a tumbler press with light-medium pressure at 360°F for 150 seconds, then turn 180° and press another 150 seconds (if doing a full wrap).

Carefully remove from press and remove transfer. GLASS WILL BE HOT!! No sealant is necessary on sublimation. *Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.

 

Bamboo lid can be engraved! Use a laser engraver or wood burning tool to add a design, words, or other details to the bamboo lid for extra personalization options!