The white ceramic jar is sublimation-ready. 11oz size. Comes with a bamboo lid.
Usage:
For use in a mug/tumbler press or convection oven.
Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately.
Convection Oven Directions:
Apply sublimation transfer on the surface of the jar using heat tape.
For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam, Pulling the tape/transfer as tight as possible with no air pockets.
If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no ceramic showing on the sides (Protects the jar from shrink wrap).
Apply shrink wrap using a heat gun to shrink it tight to the jar.
Bake in a convection oven at approximately 375 degrees F for 12-14 minutes, turning halfway.
Remove from oven and immediately remove shrink wrap and transfer.
CERAMIC WILL BE HOT!! No sealant is necessary for sublimation.
Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.
PLEASE NOTE:
Equipment varies and so may your required settings.
Please test your equipment using these baseline recommendations.
Additional Feature:
The bamboo lid can be engraved! Use a laser engraver or wood-burning tool to add a design, words, or other details to the bamboo lid for extra personalization options!