RTS Lowball STRAIGHT coffee tumbler with handle, NO SEAM, Sublimation ready coffee tumbler

Product Name:

Straight Lowball Tumbler for Sublimation, White, 10oz

Description:

Straight lowball tumbler with no bottom seam, featuring a shiny white sublimation coating for vibrant colors.

Includes handle, lid, and straw (rubber bottom sold separately).

Features:

• Material: Metal
• Color: White
• Capacity: 10oz
• Coating: Shiny white sublimation coating
• Accessories: Includes lid and straw. (rubber bottom sold separately if desired)

Usage:

• For use in a mug press or convection oven.
• Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately.
• Accessories such as rubber bottoms and straw-cleaning brushes are also available in a separate listing.
  

Convection Oven Directions:

• Apply sublimation transfer on the surface of the tumbler using heat tape.
• For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler.
• Pulling the tape/transfer as tight as possible with no air pockets.
• If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides.
• Apply shrink wrap use a heat gun to shrink shrink wrap tight to the tumbler.
• Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway.
• If your tumbler touches a metal surface during baking, the shrink wrap will be more likely to melt!
• Remove from oven and immediately remove shrink wrap and transfer.
• TUMBLER WILL BE HOT!! No sealant is necessary on sublimation tumblers. 

PLEASE NOTE:

• Equipment varies and so may your required settings.
• Please test your equipment using these baseline recommendations.

Cleaning:

Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.