KID/Youth STRAIGHT Sublimation ready tumbler RTS

Product:

Kid's/Youth Sublimation Tumbler 

Product Details: 

• Color: Shimmer White
• Design: Completely straight version
• Includes: Lid and straw (Choice of color)
• Capacity: 12 oz
• Coating: Shimmer white shimmer sublimation coating for vibrant colors
• Compatibility: For use in a convection oven
• Accessories: Shrink wrap required for pressure application (sold separately), rubber bottoms, and straw cleaning brushes are available in a separate listing

Convection Oven Directions:

• Apply sublimation transfer on the surface of the tumbler using heat tape.
• For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler.
• Pulling the tape/transfer as tight as possible with no air pockets.
• If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides.
• Apply shrink wrap using a heat gun to shrink it tight to the tumbler.
• Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway.
• If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!
• Remove from oven and immediately remove shrink wrap and transfer (caution: tumbler will be hot)

Note:

• No sealant is necessary on sublimation tumblers.
• Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed