30oz Flip Up Straw Sublimation ready tumbler with handled lid, engravable 30oz tumbler Ready to Ship (RTS)

Product: Sublimation/Laser Engraving Tumbler (30oz)

Description:

• 30oz tumbler suitable for sublimation or laser engraving
• Features a flip-up straw and handled lid for convenience

Sublimation Features:

• High-quality sublimation coating for vibrant colors
• Suitable for use in a mug press or convection oven
• Can also be engraved using a laser

Instructions:

• Convection oven requires shrink wrap (sold separately) for applying pressure during baking
• Accessories like rubber bottoms and straw-cleaning brushes are available separately
• Equipment settings may vary, so test your equipment for best results

Sublimation Directions:

• Apply sublimation transfer using heat tape
• Ensure tight wrapping without air pockets, especially for full-wrap designs
• Use blowout/butcher paper to cover the entire tumbler surface if needed

Tumbler Press Instructions:

• Press at 360°F for 60 seconds, then turn halfway and press again for another 60 seconds
• Additional time may be needed for darker designs
• Remove transfer and let cool before handling

Convection Oven Directions:

• Apply shrink wrap using a heat gun
• Bake at 385-400°F for 5-6 minutes, turning halfway
• Caution: Avoid metal surfaces during baking to prevent melting of shrink wrap
• Remove from oven and immediately remove shrink wrap and transfer (tumbler will be hot)

Additional Notes:

• No sealant is required on sublimation tumblers
• Handwashing recommended to prevent potential color bleeding from dishwasher heat