20 oz Matte Sublimation-Ready Skinny Tumbler - Ready to Ship (RTS)

Color: White
Finish: Matte (No Gloss)
Design: Straight version, no taper
Capacity: 20 oz
Inclusions: Includes lid and metal straw (rubber bottom sold separately)
Sublimation Coating: Matte white for vibrant, long-lasting colors
Compatibility: Works with mug press or convection oven
Accessories Available: Shrink wrap (for convection oven), rubber bottoms, straw cleaning brushes (all sold separately)

Directions:

• Equipment varies, so please test your equipment using these baseline recommendations.
• Apply sublimation transfer on the tumbler surface using heat tape.
• For full wrap designs, ensure tight application by pulling the transfer tightly and taping well along the seam and top/bottom of the tumbler to avoid air pockets. Use blowout/butcher paper if needed to cover any exposed metal.

Tumbler Press Instructions:

• Press at 360°F for 60 seconds, then turn the tumbler halfway and press again for another 60 seconds.
• Adjust press time if the design is darker.
• Remove the transfer and let cool.

Convection Oven Instructions:

• Apply shrink wrap tightly to the tumbler surface using a heat gun.
• Bake in a convection oven at approximately 385-400°F for 5-6 minutes, turning halfway.
• Ensure the tumbler doesn't touch any metal surface during baking to prevent the melting of the shrink wrap.
• Remove from the oven immediately after baking remove shrink wrap and transfer. Caution: The tumbler will be hot!
• No sealant is necessary on sublimation tumblers. Handwashing is recommended to prevent ink bleeding in high-heat dishwashers.