*BUY-IN #2* Sublimation ready ceramic candle jar blanks with bamboo lid, 11oz ceramic sublimation ready jar blanks with engravable wood lid
NOT available for immediate shipping. This BUY-IN will close on May 31, 2022 and product is expected to arrive in August 2022.
***Orders CANNOT be canceled once they are placed.***
White ceramic jar is sublimation ready. Comes with bamboo lid. For use in a mug/tumbler press or convection oven. Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately.
***Convection Oven Directions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations.
Apply sublimation transfer on the surface of the jar using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam, Pulling the tape/transfer as tight as possible with no air pockets. If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no ceramic showing on the sides (Protects the jar from shrink wrap).
Apply shrink wrap using a heat gun to shrink it tight to the jar.
Bake in a convection oven at approximately 375 degrees F for 12-14 minutes, turning halfway.
Remove from oven and immediately remove shrink wrap and transfer. CERAMIC WILL BE HOT!! No sealant is necessary on sublimation. *Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.
Bamboo lid can be engraved! Use a laser engraver or wood burning tool to add a design, words, or other details to the bamboo lid for extra personalization options!